Adsorption capacity in compliance with NF X 15-211 norm.
Large warning labels in compliance with ISO 3864 and NF X08.003 norms, 92/58/CEE European directive.
In compliance with the health regulation articles (R5132-66 and R5132-68).
Electric fan in compliance with CE specifications.
Tested and approved by MPA DRESDEN laboratory.
ADVANTAGES
Cabinet delivered ready to use.
Independent cabinet ensuring perfect security.
Elimination of dangerous vapours. No need of connection to an exhausting system.
No modification of building structure required.
Easy sight of the stored products.
Perforated shelves allowing liquids flow in case of discharge.
Ventilation system with lighting control.
Window control for presence of the filter adapted to your needs .
Control of the saturation level with reactive coded tubes.
Specialised high efficiency actived charcoal filter treated following chemical products stored.
Dust pre-filter, 92% efficienty with less then 3 µm particles.
Easy chane of actived charcoal cell.
TECHNICAL SPECIFICATION
Storage Compartment:
Built in white malamine-based wood.
Large glazed door with framing.
4 perforated shelves adjustable in height.
Double air inlet at the bottom.
Key-locking system.
Drawer/retention tank at the bottom with absorbing mat.
Veltilation / Filtration Compartment:
Buit in 15/10th steel with white epoxy paint (RAL 9010).
Noiseless fan : 220 volts - 50 Hz - 0,2 A - 47 watts; flow: 200 m3/h; IP20 protection, sound level 49 dB(A); delivered with cable and plug.
OPTIONS
Additional shelf.
Actived charcoal filters:
-The cabinets are delivered without actived charcoal filter. You must to select one in the table (at the bootm of this page) depending on your products storage.
Control of filter saturation level by FILTRALARM:
-Control lead.
-Adjustement allowing the detection of filter saturation level and faulty air flow.
-Sound alarm indicating a malfunction in the device.
Light alarm system.
Control of filter saturation level by REACTIVE TUBES:
-Control port on the side of the cabinet.
-Use of a manual pump.
-Control of efficienty of active coal filter’s saturation level by observing the tubes.
For Other Options Please Contact Us:
Filteralarm: allows to detect the saturation level of the active coal filter or any air defaults (ref. SFA).
Dust pre-filter (ref. PFF10).
Special legs.
Industrial absorbent mat.
Also available without ventilation/filtration system and "Toxic" com- partment (ref. AF11).
CAUTION!
The actived charcoal filter must be changed at least once a year.
Disclaimer: Loba Chemie Pvt. Ltd. makes every effort to ensure that the information displayed on this web site is accurate and complete, however it is not liable for any errors, inaccuracies or omissions. Majority of the information on lobachemie.com is liable to change without any intimation or notice.